Solid Log Materials List

First Floor Materials

• Sill Sealer
• 2×8 P.T. Starter Plate
• 14c 6×8 (EWP) D-Logs (Notch & Pass Corners To Be Cut On Site)
• 10” Self-Tapping Timber Screws, Gasket Tape, Dowel Rods & Log Caulk
• 2×4 or 2×6 Interior Wall Studs (If Required)
• 2×4 or 2×6 Double Top Plate (If Required)
• Interior 2x Door Headers (If Required)
• Exterior Double Hung Windows (If Required)
• Exterior 3-0x6-8 Doors (If Required)
• 5/4”x6” (EWP) Exterior Window & Door Trim
• Precut False Log Corners (As Required)
• Rough Stair Treads & Runners (If Required)
  
  
  

Miscellaneous

• 5 Sets Of CAD Generated Garage Plans      (Includes Foundation Plans)
• Roof Designed for a 40lb Snow Load
• Second Floor Designed For A 30/lb Live Load & A 20/lb Dead Load.
• No Specialty LVL Hangers Provided.

Second Floor Materials

• 2x Floor Joist (If Required)
• 2x Ring Joist (If Required)
• ¾” OSB Or Plywood (If Required)
• Solid Blocking & Joist Hangers (If Required)
• LVL Girder For Second Floor Support (If Required)
• 2×4 Exterior Studs, ½” Plywood Sheathing, Weather Barrier ( If Required)
• 2×4 or 2×6 Interior Studs (If Required)
• Single 2×4 Or 2×6 Bottom Plate (If Required)
• 2×4 or 2×6 Double Top Plate (If Required)
• 2×4 Gable Framing
• ½” Gable Plywood
• Vapor Barrier
• 2×8 (EWP) D-Log Siding
• Exterior Windows (As Required)
• 5/4” Exterior Window Trim
• 2x Ceiling Joist (As Required)
• 2x Roof Rafters
• 2x Ridge Beams
• LVL Beams (As Required)
• 5/8” Plywood
• 20# Felt
• 1×8 (EWP) Fascia Boards
• 1×6 (EWP) T&G (Soffits)
• 1×6 (EWP) Corner Trim
• 1×6 (EWP) Exterior Window & Door Trim